![Altera HSMC Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/altera/hsmc/hsmc_reference-manual_2910795012.webp)
2–6
Chapter 2: Board Components and Interfaces
Clocks
Data Conversion HSMC Reference Manual
© November 2008
Altera Corporation
External Clock Output Select Jumper (J23)
Table 2–8
lists the external clock output select jumper (J23) settings.
Clocks
This section describes the external clock input and output SMA connectors.
External Clock Input SMA Connectors (J26, J30)
The CLK SMA connector (J26 or J30) provides an external clock input. It can be
selected to be the input to U1, U2, and U3 (
Figure 2–3
). An external clock input
provides (while using a particular design) the
flexibility to use the same external clock
source for the entire system under test. If you choose to use a single-ended clock, R112
must be removed and R111 be installed.
Table 2–8.
External Clock Output Select Jumper (J23) Settings
Clock Source
Board Reference
Schematic Signal Name
(1)
External Clock Output Select
Jumper (J23) Settings
FPGA Clock
HSMC Connector
FPGA_CLK_A_P
FPGA_CLK_A_N
Pins 3 and 5
Pins 4 and 6
FPGA Clock
HSMC Connector
FPGA_CLK_B_P
FPGA_CLK_B_N
Pins 1 and 3
Pins 4 and 6
A/D A DCO
A/D Channel A
ADA_DCO_P
ADA_DCO_N
Pins 3 and 5
Pins 2 and 4
A/D B DCO
A/D Channel B
ADB_DCO_P
ADB_DCO_N
Pins 1 and 3
Pins 2 and 4
Note to
Table 2–8
:
(1) On the schematic, MUX (U13) output signal names are
RX_CLK_P
and
RX_CLK_N
.
Figure 2–3.
External Clock Input Schematic
Exte
rn
al
C
lock I
n
J26
LTI-SASF54GT
XT_CK_IN_N
J30
5 4 3 2
XT_CK_IN_P
1
5 4 3 2
R75
1
Unipolar
XT_CK_IN_UNI
R111
0
R112
Bipolar
0
XT_CK_IN_BI
4
5
6
T6
3
2
1
TT1_8_KK91
P
S
VTT_XCK
XT_IN_P
1.00K, 1%
XT_IN_N
1.00K, 1%
3.3 V
R78
C70
0.1
µ
F
LTI-SASF54GT