AlteliConnect Installation Guide
™
Page-2
2. Install the second mounting bracket included in the accessory kit using the (2)
suppled screws as shown to secure the Connect:Amp
™
. Attach the amp’s power
cord and plug into the internal 120VAC outlet. The power cord can be secured
using the include cable tie.
Wiring the Connect:Amp
™
A rubber cable grommet is provided
on the side of the enclosure which
allows speaker and Ethernet cables
to be connected to the amp. To
provide power to the enclosure,
simply plug the
enclosure’s
5 foot
power cord into a 120VAC outlet.
Install (2) Screws to
Secure Bracket
SONOS® and Connect:Amp™ are trademarks or registered trademarks of SONOS, Inc.
5 Foot Power Cord
Cable Grommet
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 [email protected] www.altelix.com
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
IS0118 Rev A 06/14/19
