8 |
P a g e
©
Copyright 2011 Altech UEC (Pty) Ltd
4
HDD
C
ONNECTION
4.1
PVR
A
CTIVATION
4.1.1
The PVR functions need to be activated before a hard drive will be detected.
Please follow the instructions above to enable your PVR before connecting the
hard drive.
4.2
H
ARD
D
RIVE
D
ETECTION
4.2.1
Insert the hard drive’s USB cable into the USB port at the rear of the set top
box.
4.2.2
Turn on the hard drive’s power switch (if applicable).
4.2.3
Scroll left to the “PVR Setup” icon and press OK to enter the “PVR Setup” menu
screen.
4.2.4
In this menu, you can see the current status of the hard drive.
4.3
H
ARD
D
RIVE
F
ORMAT
4.3.1
When a hard drive is used with the PVR for the first time, it will need to be
formatted before any PVR functions can be used.
4.3.2
In the “PVR Setup” menu, scroll down to the “Hard Drive Format” option and
press OK.
4.3.3
The hard drive format will take a few minutes. Once completed, the HDD Status
should say “Connected and working”
4.4
H
ARD
D
RIVE
P
ROBLEMS
4.4.1
Please see trouble shooting guide at the end of this manual.
