4- ADD A SIREN
To add a new siren on the PILOTE_RF, following the procedure:
1 Supply
the
PILOTE RF
2
Connect the two
sirens batteries
3 Push
VALID
4 Remove the
cover
5 Push
VALID
Waiting phase
pushing the siren
button.
6 Push the siren
button
The siren flashes
and beeps
7
10 seconds or
VALID
Waiting phase
new siren
8
If there is no
more sirens to
add, push
VALID
The PILOTE RF
displays the
quantity of outdoor
sirens
9
Push VALID
The PILOTE RF
displays the
quantity of indoor
sirens
10 Push one of the
buttons
The PILOTE RF
goes back to the
general
programming
11 Close the sirens
covers and the
PILOTE RF to
exit the
programming
12 The system is
ready for
operation
5- SIRENS TEST
To test a siren of the installation, following the procedure:
1 Enter
in
programming of
the control panel
and then of the
PILOTE RF
2
Push
+
3 Push
VALID
Menu to choose
the siren that you
want to test
4 Push + or – to
select the siren
that you want
to test and
then VALID
The siren sounds
during 3 seconds
during the
waiting phase
5 10 seconds or
VALID
Return to the
menu of choice
6 If there is no
more siren to
test, push + & -
Return in general
programming
Remove
COVER
>ADD<
>SIREN<
X SIREN
INDOOR
X SIREN
OUTDOOR
WAIT 2mn
1 SIREN
SIR N° 01
OK
WAIT 2mn
0 SIREN
>ADD<
>SIREN<
Close
COVER
>ADD<
>SIREN<
> TEST <
>SIREN<
WAITING
SIR N°01
SIREN
N°01 ?
TEST SIR
N°01 OK
SIREN
N°01 ?
> TEST <
>SIREN<
All manuals and user guides at all-guides.com
