SPECIFICATIONS
Supply voltage on +12V Charge :
12 to 14.5 Vdc
Output voltage on +BAT:
13.8 Vdc (+/- 0.2 Vdc)
Residual ripple allowed:
250 mV
Consumption without alarm on battery:
5 mA
Consumption with alarm on battery:
1.6 A
Control voltage (+BL) :
9 to 16 Vdc (0.1 mA)
Triggering voltage:
below 4 Vdc
Reset triggering :
more than 9 Vdc
Level sound at 1 m. :
> 117 dBa
Degree of protection :
IP31 IK08
Environment :
Class II – General indoor
Operating temperature:
-10°C to +55°C
Dimensions :
192 X 182 X 62 mm
Type of cables for the connection:
Cable 3 pairs rigid : diameter >= to 0.5 mm
flexible : diameter >= to 0.2 mm
Type of internal batteries :
12V 2.1Ah
YUASA
NP2.1-12FR
12V 2.1Ah
YUCELL
Y2.1-12FR
12V 2.1Ah
POWERSONIC
PS 1220 V0
12V 2.2Ah
ELECKSON
BEL120022
12V 2.3Ah
ACD
ST20
12V 2.1Ah
SUNLIGHT
SP 12-2.1V0
Autonomy on internal battery :
72 hours
Length of alarm:
31 minutes
SI-MAX is admitted to NF mark and A2P « 3 shields »
in accordance with the norm NF C 48-265 and with the reference of the
certification NF324-H58
Certificate n°: 3130000280 Manufacturing Unit: 122P2
CNPP Certification
http://www.cnpp.com
AFNOR Certification :
http://www.marque-nf.com
Electromagnetic compatibility :
in accordance with the norms NF EN 50130-4 and NF EN 55022
Electric security :
in accordance with the norm EN 60950 ed. Oct. 2000
N° INCERT : B-712-0001
NOTINS0UK000009-V1.05
INSTALLATION GUIDE
Indoor siren self-powered
Version 1
Made in France
SI-MAX
SI-MAX
is an indoor siren…
VERY POWERFUL!
In discrete metal box, self-protected against forced opening and tear with
housing for the internal battery 12V – 2Ah, SI-MAX is the inevitable solution to
deter intruders.
The terminal « +12V CHARGE »is used for constant load from the battery’s internal siren.
SI-MAX
offers a
double load regulation
for battery:
-
Regulating the load current to 100 mA
, sufficient to charge the internal battery
normally.
In alarm only the internal battery is required. This effectively protects
the charger from the panel when multiple sirens are powered by it.
-
Regulation of the charging voltage to 13,8 Vdc :
even if the charging voltage
delivered by the panel is not high enough, SI-MAX amplifies it to provide the battery with
a charging voltage maximum of 13.8 Vdc to warranty a perfect load.
SI-MAX has a tamper against the forced opening and tear
without any regulation. The tamper
against the forced opening can function only by adding a screw on top of the card (length of the
screw 55-65mm, diameter: 4 to 5mm). The screw is placed just above the electronic card. It must
be screwed into the wall until its head comes into contact with the electronic circuit without
pushing on it. To facilitate the positioning of the screw, use the drilling template provided.
_________________________________________________
OPERATION
A positive and continuous voltage of 9 to 16V on the terminal "+ BL SIR" can block or reset the
SI-MAX. At the disappearance of this blocking voltage, the alarm is activated for duration of 31
minutes. At the end of this delay, the SI-MAX is on standby, which avoids damaging the internal
battery by a complete discharge.
To trigger again, SI-MAX must be reset: the blocking voltage of 9 to 16V should reappear on the
terminal « +BL SIR» for at least 1 second.
Note that during the power up, SI-MAX doesn’t trigger even if the blocking voltage is absent. It
must first be arm by applying the blocking signal for at least 1 second.
Moreover, the supply being provided by the terminal « +12V CHARGE» which limits the current to
100mA, SI-MAX can trigger only in the presence of the internal battery 12V-2Ah.
SI-MAX and Altec are registered trademark of A.T.L.S.
