13
Listening to a Non-docking iPod or Other Portable Audio Device
If you have a non-iPod MP3 player or other non-docking portable audio
device, you can enjoy it through your Altec Lansing Moondance Home
speaker system as well. Just connect it via the AUX IN jack. Here’s how:
1
Locate a 3.5 mm stereo cable
(not included).
2
Plug one end of the stereo cable
into your device.
Your device should have either a
headphone or LINE OUT jack for you
to plug into.
3
Plug the other end of the stereo
cable into your speaker system’s
AUX IN jack.
The AUX IN jack is located on the back of the unit.
4
Ensure your speaker system is powered on.
If the system isn’t on, press the STANDBY button on the speaker
system or the button on the wireless remote.
5
Select “AUX” mode.
Press the SOURCE button on your speaker system or the SOURCE
button on the wireless remote until the AUX appears on the LCD.
6
Turn on your device and start it playing.
7
Adjust the volume.
Use the and – VOLUME buttons on the Altec Lansing
Moondance Home speaker system to adjust the system volume. Or,
use the and – VOLUME buttons on the wireless remote.
NOTE
You may need to adjust the device volume also. Your device’s
volume should be set to approximately ¾ volume.
8
When you are finished listening to your portable audio device,
please remember to turn both it and your speaker system off
to conserve electricity.
