Altec Lansing IMT7001, Быстрый старт

Страница: 5 / 12

AL Shockwave 100
Bluetooth Connection
Stereo pairing (two speakers) :
1. Have one speaker turned on, paired and playing music. It will serve
as the HOST (the Primary speaker). The display will be showing ‘Bt’
(Pair by pressing the BT/PAIR button, BT flashes on the display then
goes solid when paired).
2. Power on an additional compatible speaker. It will serve as a Secondary speaker.
3. Press and hold the BT/PAIR button on the Primary speaker for approximately
two seconds or until the display changes from solid ‘Bt’ to flashing ‘HOSt’.
4. Quickly tap the BT/PAIR button on the Secondary speaker. The display should
change from flashing ‘Bt’ (normal pairing) to flashing ‘St PAIr’ (stereo pairing).
5.The speakers will connect and then both displays will show ‘Bt’.
The speakers will now play the same music from the same audio
source, one will play Left and one will play Right.
Go to the Bluetooth settings menu on your phone. Make sure
that Bluetooth is turned on. Connect to the device listed
as “AL Shockwave 100”
Primary Speaker
Secondary Speaker