Altec Lansing ALP-XP850, Руководство пользователя

Страница: 5 / 10

ALP-XP850 XPEDITION 850 5
To reduce the risk of electrical shock, do not open the unit. There are no user replaceable parts
inside. Please refer servicing to a qualified Altec Lansing service technician. Do not attempt to
return this equipment to your dealer.
Do not open the device or attempt to disassemble the internal parts or modify them in any way.
The device contains no user- serviceable parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified Altec Lansing service personnel.
Replacement Parts: When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electrical shock, or other hazards.
Responsible Party Name:
Innovative Concepts & Designs
Company address:
107 Trumbull St-F8 2nd Floor
Elizabeth, NJ, 07206 USA
FCC ID:
2AE6GALP-XP850
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to Part 15 of the FCC Rules. These equipment generates uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio or television reception, which can be determined by turning the equipment off and
then on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.