The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
I M P O R T A N T
Aould be situated so that its location or
position does not interfere with its proper
ventilation. For example, the appliance should
not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation
openings; or placed in a built-in installation,
such as a closed bookcase or cabinet that may
impede the flow of air through the ventilation
openings.
Heat — The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances
(including amplifiers) that produce heat.
Power Sources — The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them. Pay particular attention to
cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
Grounding or Polarization — The precautions
that should be taken so that the grounding or
polarization means of an appliance is not
defeated.
Cleaning — The appliance should be cleaned
only with a polishing cloth or a soft dry cloth.
Never clean with furniture wax, benzine,
insecticides or other volatile liquids since
they may corrode the cabinet.
Non-Use Periods — The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
Object and Liquid Entry — Care should be taken
so that objects do not fall and liquids are not
spilled into the enclosure through openings.
Damage Requiring Service — The appliance
should be serviced by qualified service
personnel when:
• The power-supply cord or the plug has been
damaged.
• Objects have fallen, or liquid has been
spilled into the
appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate
normally or
exhibits a marked change in performance.
• The appliance has been dropped or the
enclosure
damaged.
Servicing — The user should not attempt to
service the appliance. Servicing should be
referred to qualified service personnel or
returned to the dealer or call the Altec Lansing
service line for assistance.
Connecting the
Power Cord
AC Wall Socket
Long slot is neutral
(ground) side.
Insert the wide blade into
the ground side slot.
C A U T I O N
To prevent electric shock do not use this
(polarized) plug with an extension cord,
receptacle or other outlet unless the blades can
W A R N I N G
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The FCC Wants You to Know
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the
equipment
and receiver.
c) Connect the equipment to an outlet on a
circuit
different from that to which the receiver is
connected.
d) Consult the dealer or an experienced
radio/TV
technician or help.
FCC Warning