6 | System Configuration
BYK-Gardner GmbH
48
spectro2guide Family
295 024 855 E 2010
6.1.6 Statistics
Go to
Measurement Parameters
>
Statistics
and select the statistic op-
tions to be used during measurement: No. of measurements required on
standard and on sample and statistic data to be displayed.
The number of measurements required is visible in the measurements re-
sults in the upper right of the screen, e.g. “2/2” means: 2 measurements are
required and 2 measurements are done.
If the no. of measurements on standard is e.g. “2”, the icon for
Next
be-
comes active after the second measurement.
If the no. of measurements on sample is e.g. “3”, the icon for
Next
be-
comes active after the third measurement.
