Altana 2139, Краткие инструкции, Страница: 8 / 24

byko-drive S BYK-Gardner
8 285 025 845 E 2106
3 System Preparation
3.1 Delivery Content
Unpack the unit being careful to check all packaging for items. Some acces-
sories may be found in a separate box within the main box. Within the package
are the following standard items.
Quantity Description
1 Applicator unit byko-drive S with:
• Vacuum plate or
• Glass plate
1 Power supply
1 Power cord
1 Weight 500 g
1 Drip pan
1 Safety instructions
1 Short instructions
Locate a suitable location free from obstructions and clutter. The byko-drive S
should be at a convenient height for the operator.
Plug the power supply into the DC input jack on the rear side, next to the
power switch. A power cord appropriate for your area’s power connector is
supplied to connect the power supply with AC power. The system will operate
on power from 100 - 240 V AC ~ at 50 - 60 Hz.
Place the drip pan in the provided indentation on the right of the vacuum
plate.
The 500 g weight is used to provide additional pressure on an applicator or
hold a wire-wound rod is the proper position. If needed, place the weight in
the slots of the pusher bar.