Altana 0470, Руководство пользователя

Страница: 8 / 12

8
4 Operation
MEASUREMENT OPERATIONS
1. Hold the meter by its Handle Grip and point it toward the surface
to be measured.
2. Pull and hold the Trigger to turn the meter on and begin testing.
The display will light if the battery is good. Replace the battery if
the display does not light.
3. Release the Trigger and the HOLD display icon will appear on the
LCD indicating that the reading is being held. In HOLD status, press
the laser button to turn on or off the laser. Press the buzzer button
to turn on or off the buzzer. Press the MIN/MAX button to display
the minimum and maximum temperatures.
4 The meter will automatically power down about 10 seconds after
the trigger is released.
Switching °C/°F
Press the °C/°F button two seconds until the °C/°F symbol changes.
Switching Max/Min
Press the Max/Min button.
Switch on/off laser
Press the laser button
Switch on/off buzzer
Short press the °C/°F button
Find Max/Min
If the buzzer is turned on, when BYK t200 finds the Max/Min value,
the buzzer will beep.
BATTERY REPLACEMENT
If battery power is not sufficient,
the low power symbol will be displayed.
Replace with one new 9V alkaline battery.
Open the battery cover by squeezing the
rubber grip below the display and
pull forward.