Altair DA-240, Руководство пользователя

Страница: 10 / 16

10 DISTRIBUTION UNIT DA-240
SURVIVAL AUDIO PATCH: XLR MALE, XLR FEMALE, Jack ¼, RCA and MINIJACK
The Audio distribution unit Altair DA-240 incorporates two multigender patches
wirings in parallel, to assist in difficult interconnections like minijack or unbalanced
RCA. Each patch is made up of a XLR male, a XLR female, JACK ¼”, a RCA and
minijack
4. OPERATION
The Altair DA-240 appears to fulfil the huge demand of distributed audio signals
in press and multimedia events. This passive panel must be associated to the well
know active Altair DA-410 distribution and zone mixer unit. The panel allows a direct
input and output XLR connections. Each Stereo input pairs can be selected as mono
inputs. All the 40 outputs incorporate full range attenuators to interface a line level
signal to a mic level to drive camera and recording sets easily.
Outputs are grouped in 10 blocks of 4 outputs vertically. Each block incorporates
individual A/B input selection, speaker monitoring and level adjustment in the DA-410
side. All input and output are electronically balanced and can be optionally equipped
with input and output transformer. Two multigender patches are included to assist in
difficult interconnections.
BALANCED OUTPUT