?
B
A
c
1.
Place the mounting label at the upper edge
of the pipe – as close to the joint with damper
as possible
See ill.
A
2.
Drill 3 holes (3.8mm) as shown on the
mounting label. Leave the mounting label on.
3.
Mount the bottom of the Airflow Alarm.
See ill.
B
It is highly important not to use an electrical tool,
in order to avoid deformation of the bottom part.
4
Insert the battery.
5.
Make sure that the plugs for light diodes
and push-button are mounted.
6.
Ensure that no conductors are stuck.
7.
click on the upper part. Push both ends until
you hear a click. The Airflow Alarm is now
ready for use.
See ill.
c
Changing battery:
Stick a small screwdriver into the slot and take off
the upper part.
Mounting instructions
This box contains:
1 Airflow Alarm
1 Battery – 9V
1 Drill 3.8 mm
2 Screws 4.2 x 9.5
1 Mounting label
Damper
