ALSEYE Halo 3 Fan Set, Руководство пользователя

Страница: 9 / 13

Manual Halo 3.0 9 of 13
14.06.2019
Replacing the battery: Open the battery compartment on the back of the
remote control by pushing the small tab inwards while
pulling out the battery holder.
Remove the battery and reinsert a new CR2025
battery as shown on the back of the remote control.
Do not dispose of the battery in the household waste.
Please read chap. 8th.
6 Troubleshooting
Fault / error message Possible reason(s) Help
The fan(s) do not turn Fan(s) not connected Check that the cables
marked "Fan" are correctly
connected.
LEDs do not light up Switched off Switch on the LED
illumination via the remote
control.
Cable not connected or not
connected correctly Check that the cables
marked with "LED" are
correctly connected.
Please also read chap. 4
Check if the controller is
connected to the power
supply.
Effects cannot be adjusted
with the remote control Connection to the receiver /
controller disturbed Move the remote control
closer to the receiver /
controller.
Reconnect remote control
and receiver / controller.
Please read chap. 5
"reconnect".
Battery of the remote
control empty Replace the battery of the
remote control. Please
read Chap. 5 "Replacing
the battery"
1.
2.