Network Camera User Manual
45
Feature 4-57 Working period settings
Working period settings:
Arming time of motion detection can be shown in the option of “Arming time”.
You can edit arming time by clicking [Settings], you can set arming period of the whole week or
one day in the week.
You can set start and end time in 6 periods of the day in detail.
You can save the settings by clicking [OK] after you set the parameters.
Linkage model:
Linkage models are “video linkage”
、
“send email”
、
“snapshot”.
You need to save settings by clicking [OK] after you change parameters.
4.2.5.3.
Abnormality
Abnormality can be divided into the following categories:
No SD Card, Capacity Warning, SD Card Error, Disconnection, IP Conflict.
The abnormality of each exception is shown below. When the interface is set to enable it ,will
detected.
