background image

Version: 2021-05-21

 EN

Protection class III

Notification of Risks

CE label

Safety Instructions

The light can be 

used in interiors and 

exteriors.

Cleaning Instructions

The product may not

be disposed of in the

household garbage.

Don’t look directly into 

the LED! The LED is that 

bright that it might 

damage your eyes!

Installation only by 

qualified and autho-

rised persons.

INTENDED USAGE

This product will only serve the purpose of illumination.

The LED-stripe 

can be used in interiors.

SCOPE OF DELIVERY

1 x FLEXY 300

1 x set of instructions for assembly, operation and safety

SAFETY

READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT.

KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR

FUTURE USE.

DESCRIPTION OF PARTS

Flexible LED-stripe 24W (4,8W/m) 50x0,48W/24Vdc

CRI>90

TECHNICAL DATA

FLEXY-300WWN-CRI90

 = 3000K, width: 8 mm

FLEXY-300CWN-CRI90

 = 6000K-6500K, width: 8 mm

Lenght: 5m = 50 segments à 100mm | 300 LED = 50 segments à 6 

LED | are cuttable after each segment

FLEXY-300WWN-CRI90N

 = 3000K, width: 8 mm

Lenght: 5m = 50 segments à 100mm | 350 LED = 50 segments à 6 

LED | are cuttable after each segment

LAMP

SMD--LED

The LED light agent cannot be replaced.

DISPOSAL

The packaging consists of environmentally friendly materials.

Dispose of them in the local recycling containers.

Do not dispose of this product in the household gar-

bage when it has reached the end of its lifecycle, but

rather take it to a disposal center. Your local officials

will provide you with information about collection

offices and their business hours.

MAINTENANCE AND CLEANING

The LED light agent cannot be replaced.

•  Do not use solvents, such as benzene and similar 

agents. The light would be damaged thereby.

•  Only use a dry, lint-free cloth for cleaning the 

product.

FLEXY 300 

CRI90

Flexible LED-stripe

FLEXY-300WWN-CRI90 

FLEXY-300CWN-CRI90 

FLEXY-300WWN-CRI90N

SAFETY INFORMATION

•  The light can be used in interiors.

•  Before mounting, the intended splice must be thoroughly 

cleaned (free from dust, oil and grease layers).

•  Assembly only on suitable carrier material, for example 

Aluminum regarding heat conduction as well as reliable 

adhesion of the adhesion foil.

•  Don’t install under power.
•  Follow the instruction manual for installation.
•  Installation only by qualified and authorised persons.
•  Do not use the product when it has been damaged (defective 

covers) or there are operational faults such as flickering, 
smoking, steaming, crackling noises or the smell of smoke.

•  A damaged or defective product must be changed 

or repaired by the manufacturer, a service person or a 
comparable qualified person.

•  Installation only under observance of the valid guidelines 

specific to application and country among others VDE 0.100.

•  Never open one of the electrical operating agents or plug any 

objects into them. Such procedures signify a danger to life 
through electrical shock.

•  Absolutely avoid contact between the product and water or 

other liquids. For reasons of electrical safety, the light may not 
be placed in contact with water or other liquids or submerged 
in water.

•  The product may not be changed or modified.
•  In operation or after extended periods of operation, avoid 

touching the external surface of the LED luminaire, there is a 
danger of high temperatures that can cause burns.

•  Do not use the LED luminaire in areas with explosive or 

chemical aggressive atmosphere or reduced ventilation.

•  The warranty claim and guarantee is rendered invalid in the 

event of damage to the product, which is caused by not 

following the operating instructions. We are not liable for the 

consequent damage. Because of specific characteristics of 

LED‘s (life, deviation in colour etc.) we formulated special 

terms for planing and installing our LED products. They 

are part of these installation manual! Should they not be 

available, request them please!

•  Don’t look directly into the LED! The LED is that bright that it 

might damage your eyes!

address | contact

A.L.S. GmbH & Co. KG

Mastorter Str. 31 | 88069 Tettnang (Germany)

Tel.: +49 (0) 75 42 93 44-0 | Fax.: +49 (0) 75 42 93 44-30

E-Mail: [email protected] | Web: www.als.de

Отзывы: