background image

 

 

 
This manual provides information about the following: 

 
1. 

Assembling and connecting the b@home gate 

 
2. 

Setting up b@home system  

 
3. 

Basic information about wireless installations and optimum placing of the b@home components 

 
Information about assembly and connecting the sensors and actuators to the power supply can be found in the relevant 
operating instructions. 
 
Further information can be accessed from the following locations: 
 
 
 
 

 
 
 
 
 

 3. Safety information 

The applicable safety regulations should be observed. After installation, the installation  company should instruct the 
operator in how the control system works and how to operate it. The operating instructions must be stored somewhere 
freely accessible to operating and maintenance staff. 
 

Operating the system in the vicinity of devices, which do not comply with the EMC regulations, may affect the device 
functions. 

 

Do not open the b@home gate or wall power supply under any circumstances.  
 
The b@home gate, FTRFB-280.1xx sensors and HTFMA-180.161 and HTFRA-010.101  actuators must not be 
disposed of in general household waste. 
 

 

4. Quick start instructions 

1.) Fit b@home gate (see Section 12.). 
2.) 

Use Ethernet cable to connect b@home gate to a free LAN port on the router 

(see Section 13.). 

3.) Use wall power supply to connect b@home gate’s power supply (see Section 13.). 
4.) Open b@home-app on an end device logged onto the home network (see Section 14.1.2). 
5.) Define system function (see Section 14.3). 
6.) Set up rooms (see Section 14.6.). 
7.) Enter switching times and temperatures of automatic programs (see Section 14.7). 
8.) Set up Internet access (see Section 14.9.). 
 

 5. Scope of delivery 

  1 b@home gate MGCBB-064.360  

  1 wall power supply  

  1 Ethernet cable, cat. 5, approx. 3 m long 

  1 assembly equipment pack (comprising 2 screws with dowels)  

  1 set of quick start instructions 

  1 drilling template 

 

Carefully check whether damage to the packaging suggests that your b@home gate or the  accessories supplied 
have been damaged during transport! 
 
 
 
 
 
 

 

 

 

Website 

b@home 

 

Product film 

b@home 

 

alre 

Website 

 

Installation film 

b@home 

Содержание B@home System


























Отзывы: