hypercharger - Operation Instructions and Installation Guide
Version 1-1C
Page 36 of 57
6
Diagnosis
and parameterization
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
6. Diagnosis and parameterization
After successful mechanical and electrical installation of the charging station, the correct
functioning of the device can be checked by means of a diagnostic and parameterization
tool. The diagnostic interface can be loaded via any browser at the default IP address as
shown in Table 13.
Default IP address
192.168.1.100
Table 13:
Default Charging Station IP address
6.1. User interface
On the first connection to the web interface, one can find a prompt for the username and
the password, like presented in Figure 30.
Figure 30:
Credentials form shown at first connection with web interface
Type the default username and password, as shows in Table 14. Please note that for
security reasons,
it is important to change the username and password.
Default Credentials
Username
admin
Password
admin123
Table 14:
Default Credentials to web interface
