7
-EN
Switching the Visual Input Signal (Rear Camera)
After setting to ON in “Setting the Rear Camera,” then this
setting may be carried out.
Setting item: CAMERA-IN SIG.
Setting contents: NTSC / PAL
• When ON is set in “Setting the Rear Camera” (this page),
the setting can be made.
Setting the AUX Mode
Setting items: AUX IN-1 to 3
Setting contents: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not selected when the optional DVD player or DVD
changer is connected.
• AUX IN-3 is adjustable when the external expansion box
(VPE-S431) is connected.
Naming External Devices
When more than one external device is connected, you can
name each (up to 3) as you like.
Setting item: AUX IN-1 to 3 NAME
Setting contents: AUX-1 (2, 3) / VCR / GAME-1, 2 / TV
*
1
/ EXT-DVD / DVB-T
*
2
*
1
When an optional TV is connected, set the unit to TV. Refer
to “TV Operation” (page 15).
*
2
VPA-B211P only.
• The selected source name is displayed instead of AUX
source name.
Adjusting the External Input Audio Level
Setting item: AUX IN-1 to 3 LEVEL
Setting contents: LOW / HIGH
LOW:
Decreases the external input audio level
HIGH: Increases the external input audio level
Switching the Visual Input Signal (AUX)
After setting to ON in “Setting the AUX mode,” then this
setting may be carried out.
Setting item: AUX IN-1 to 3 SIG.
Setting contents: NTSC / PAL
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to
ON.
Setting item: NAV.
Setting contents: OFF / ON
ON:
Navigation source is displayed.
OFF:
Navigation source is not displayed. The
settings related to the navigation can not be
changed from this unit.
Navigation Audio Interruption Volume
Adjustment
With an Alpine navigation system connected to the VPA-
B211P/VPA-B211E, the voice guidance of the navigation
system will be mixed with the DVD or CD play.
You can adjust the volume level of the voice guidance.
Setting item: NAV. MIX LEVEL
Setting contents: OFF, +1 to +15
• When NAV. is turned on, the setting can be made. Refer to
“Setting the Navigation Mode” (this page).
Setting the Display Type
Depending on your external monitor, the screen may not be
correctly displayed. In this case, change the type.
Setting item: DISPLAY-TYPE SEL.
Setting contents: TYPE1 / TYPE2
Setting the Volume Level
The volume level can be set for each source.
Setting item: VOLUME LEVEL
Setting contents: LOW / MID / HIGH
• The sound level increases as follows: LOW
→
MID
→
HIGH.
Setting the Rear Camera
When the rear camera is connected, rear pictures are output
on the screen.
Setting item: CAMERA-IN
Setting contents: OFF / ON
ON:
When the shift lever is set to reverse (R),
the rear camera picture is shown on the
screen.
OFF:
The rear pictures are not output.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly
connected.
130.com.ua
Autogood products internet store http://130.com.ua