8
-EN
Storing channels in
memory (auto memory)
The auto memory function picks up the
TV broadcast signals in the area where
you are and stores them automatically
in memory.
1
Select TV as the input source.
Press the TV/AV button on the re-
mote controller repeatedly to select
TV.
2
Start scanning TV broadcast sig-
nals.
Press the A.MEMO button on the
remote controller.
The auto memory function starts
and TV broadcast signals are
picked up and stored in memory
while scanning.
When scanning is over, the screen
shows the TV program of the smallest
channel number in memory.
NOTES
• TV stations with weak signals are not be picked
up, therefore not being stored in memory.
• If you drive from one broadcasting area to anoth-
er, the stored channels will not be tuned in. In this
case, perform the auto memory function again to
store the stations in another area.
TUE-T112P.book Page 8 Friday, April 29, 2005 11:40 AM