17
-EN
01GB07TMEM860.fm
ALPINE TME-M740BT 00-00000Z00-A (EN)
Installation
Accessory List
1
Remove the main unit attachment fitting.
2
Loosen the main unit attachment fitting with a coin
etc., slide it into the track on the rear of the main unit
and temporarily fasten it. Then fix it to the stand.
3
Check the sticking position.
Attaching the monitor and stand
CAUTION
Do not install the monitor near the front passenger
seat air bag system.
Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Display cable (2.5m)/Power Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Cord clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Monitor stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Fixing Screw (M4×12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cloth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Bracket Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Bracket Side (L/R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Screw (M5×8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Pull this part to release.
Main unit
attachment fitting
Slide in an
upward direction.
In order to use safely, attach to the following places.
•
Stable and secure places.
•
Places that will not have your view blocked by the main
unit when driving.
•
Places that you will not hit against if you lean forward
while you wearing your seatbelt.
•
Places where the main unit cannot hit against the steering
wheel while driving.
•
Be aware that if the surface of the dashboard is leather, wooden
panel, stretched fabric or any non-resin based product, then the
surface will be damaged when you remove the stand.
•
Do not place the main unit directly in front of the air conditioner
vents.
The fixed arm tilts towards the seat side.
Angle
adjustment
screw
Seat side
Front glass side
A
Temporarily fasten the stand with gum tape.
B
Loosen the adjustment screws, and adjust to a safe,
viewable position.
Main unit
Line of sight
Dashboard
If the main unit
invades your line
of sight then it will
block your view.
01GB00TMEM860.book Page 17 Monday, October 16, 2006 1:50 PM
