background image

EN

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURLEY. Be sure to use only 
the specified accessory parts. Use of other than designated parts may damage this unit internally 
or may not securely install the unit in place. This may cause parts to become loose resulting in 
hazards or product failure.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE 
GROUND CONNECTIONS. 
Bolts or nuts used for the brake, steering systems (or any other safety 
related system), or any storage tanks should NEVER be used for installations or ground 
connections. Using such parts could disable control of the vehicle and/or cause fire, etc.

HALT USE IMMEDIATLEY IF A PROBLEM APPEARS. Failure to do so may cause personal 
injury or damage to the product. Return it to your Authorised Alpine Dealer or the nearest Alpine 
Service Centre for repairing.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY 
DRIVING YOUR VEHICLE. 
Any function that requires your prolonged attention should only be 
performed after coming to a complete stop. Always stop the vehicle in a safe location before 
performing these functions, Failure to do so may result in an accident. 

This symbol means important instructions.

Failure to heed them can result in injury or property damage

CAUTION

MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire 
or product damage.

ROUTE THE WIRING TO ENSURE IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL 
EDGE. 
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed 
edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in 
metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of 
the hole.

DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside 
and may result in fire.

HAVE THE WIRING AND INSTALLATION DONE BY AN EXPERT. The wiring and installation of 
this unit requires special technical skill and experience. To ensure safety, always contact the 
dealer where you purchased this product to have the work done. 

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in 
locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may 
result in product failure.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE 
DRIVING. 
Failure to do so may result in an accident.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed 
application may result in fire, electric shock or injury.

EN

Содержание SWD-1600














Отзывы: