THE SERRANO 42 SERIES
FIREPLACE SPECIFICATIONS AND INSTALLATION INFORMATION
Minimum Opening
Fireplace Dimensions
Framing Dimensions
FRONT VIEW
TOP VIEW
LEFT SIDE VIEW
CORNER INSTALLATION
WALL OR CHASE INSTALLATION
The SE Series is a zero-clearance fireplace. The fireplace has spacers attached to
assist in a correct installation. Combustible materials may touch the spacers, but
must never be notched , cut, or modified to come closer to the appliance than the
spacers allow.
PLATFORM INSTALLATION
FLOOR LEVEL INSTALLATION
The above framing diagram does not show a hearth. A hearth is not required,
but often used with this appliance. If a hearth is desired, it must be constructed
so as not to inhibit the valve access door at the bottom of the appliance. The
hearth need not conform to codes applicable to solid fuel appliances.
File:U\user2\randy\SE42spec
20.5"
42-1/2" Minimum
38" Minimum
* As Required By Design
20.5"
42-1/2" Minimum
38" Minimum
SE-42 SERIES
Weight: 250 lbs
BTU Input: 41,500
outside air may come in on either side
57"
80"
If Rectangular Ducting (Part # 04075) is
used, dimensions can be reduced by 3.5”
