Alpine PXA-H800, Руководство по обслуживанию

Страница: 13 / 89

ALPINE PXA-H800_EN 68-13530Z69-A (B5)
System Example
Connecting an automobile factory system (standard audio, etc.) and External Amplifier
Input Pattern: 4ch&2ch Input
AUX INPUT
CH-1 (L) CH-2 (R) CH-3 (L) CH-4 (R) CH-5 (L) CH-6 (R)
AUX1 AUX2
FL
(Front Left)
FR
(Front Right)
RL
(Rear Left)
RR
(Rear Right)
L
(Left)
R
(Right)
Commander cable
(RUX-C800 included)
RUX-C800 (Sold separately) * 1
Audio output jacks
To External Amplifier
(see page 10)
External Amplifier
Rear speaker (L) output lead
Rear speaker (R) output lead
Front speaker (L) output lead
Front speaker (R) output lead
Rear speaker (L)
Rear speaker (R)
Front speaker (L)
Front speaker (R)
*
5
Computer connection
terminal
*
1
When using a factory car audio system, the RUX-C800 Commander (sold separately) is required.
* 2 If your factory system does not have a Remote Turn-On Lead, connect a cable that enables an incoming power supply (accessory power) in
the ACC position.
* 3 If using the Speaker-RCA Conversion cable, up to 6 channels can be input. Make connections according to your system.
*
4
Before using the Speaker-RCA Conversion cable, remove the cord tip coating, cut the cord into 2 cables, connect the cable with commercially
available bullet or solderness terminals attached to the tips.
*
5
When connecting a speaker input cable, connect via a solderless terminal or solderless connector after disconnecting the automobile’s speaker
cable.
Automobile speaker cable
CAUTION
Make sure to disconnect the factory speakers and the speaker output cable for the factory system.
When using fiber cable, follow the guidelines below:
When laying or bundling optic fiber cables, the minimum bending radius should be 30 mm. Bending beyond the radius will break the cable, resulting in no
digital sound being output.
Do not put the product or other items on the optic fiber cable.
•
•
e
White
*
3
(2) PXA-H800 (European) Only