background image

8

-EN

Setting RDS Reception Mode and
Receiving RDS Stations

The RDS (Radio Data System) is a radio
information system using the 57 kHz subcarrier
of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic
information, station names, and to automatically
re-tune to a stronger transmitter that is
broadcasting the same programme.

1

Press the F button so that the F indicator lights
up.

2

Press the AF button to activate the RDS mode.

3

Press the DN 

g

 or 

f

 UP button to tune in

the desired RDS station.

NOTE

When the BAND button is pressed and held for more
than 2 seconds while a station name is displayed, the
display shows the station frequency for 5 seconds.

4

Press the AF button again to deactivate the RDS
mode.

5

Press the button to activate the normal mode.
The F indicator light goes out.

Tips

The RDS digital data includes the followings:

PI

Programme Identification

PS

Programme Service Name

AF

List of Alternative Frequencies

TP

Traffic Programme

TA

Traffic Announcement

PTY

Programme Type

EON

Enhanced Other Networks

RDS Operation

Recalling Preset RDS Stations

1

Press the F button so that the F indicator lights
up.

2

Press the AF button to activate the RDS mode.
The display shows "AF" when the RDS mode is
activated.

3

Press the button to activate the normal mode.
The F indicator light goes out.

4

Make sure that the F indicator light goes out,
then press the preset location button in which
your desired RDS station is preset.
If the preset station's signal is weak, the unit
automatically searches and tunes to a stronger
station in the AF (Alternative Frequencies) list.

5

If the preset station and the stations in the AF list
cannot be received:
The unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station and the preset indicator
disappears.

NOTE

For presetting the RDS stations, refer to the Radio
Operation section. The RDS stations can be preset in
the F1 and F2 bands only.

AF

2

 

f

 UP

DN 

g

T.INFO

INTLZ

F

PTY

Содержание MDM-7741R






















Отзывы: