Alpine LC70-69P, Руководство по установке

Страница: 22 / 32

43 44
Assembly: Front Exocasing
Then take the plastic washer and plastic nut and run them up to the mounting surface.
Try to keep the usb hole perpendicular to the pod. A tip is to use a USB drive in the
port as an anchor point when tightening the plastic nut. Careful not to damage the usb
port.
65
Clip the LED into place by applying firm pressure to the NON clip side until it pushes
into the pod. Then push the other side of the LED into place. You should see the light
clip into place. NOTE: The LED’s are marked ‘R’ for Right and ‘L’ for left.
66
Assembly: Front Exocasing
Run the wire through the channel of the exocasing securing the wire into the ‘U’
channels and exiting to the speaker area of the exocasing. Then secure the cables
down to the indicated boss with a cable tie.
67
Take the Component Speaker from your chosen Alpine Speaker kit. Turn the
exocasing over and place the speaker into the pod using the x4 bosses to locate it.
68