IVA-W200/IVA-W200E
1
Antenna Receptacle
2
Video Output Connector (AUX OUTPUT) (Yellow)
Output the video.
3
Audio Output Connectors (AUX OUTPUT)
RED is right and WHITE is left output the audio.
4
Video Input Connector (AUX INPUT) (Yellow)
Input the video.
5
Audio Input Connectors (AUX INPUT)
RED is right and WHITE is left input the audio
6
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
7
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
8
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect
to the plus side of the car’s reverse lamp that lights when
the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
9
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch
panelcompatible rear monitor.
!
RCA Extension Cable (sold separately)
"
Power Supply Connector
#
Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
$
Steering Remote Control Interface Connector
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
%
CAMERA Input Terminal
Use when connecting a back-up camera.
&
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
(
Rear Output RCA Connectors
RED is right and WHITE is left.
)
Front Output RCA Connectors
RED is right and WHITE is left.
~
Subwoofer RCA Connectors
RED is right and WHITE is left.
+
iPod Direct Connector
iPod control signals.
Connect this to an iPod, using the (also separately sold)
FULL SPEED™ Connection Cable (KCE-422i).
,
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, Equalizer, HD Radio™ TUNER
MODULE, etc.) equipped with Ai-NET.
• Interface adapter for iPod (KCA-420i) is not recommended
for use with this product.
• You can input TV/video sound by connecting an optional Ai-
NET/RCA Interface cable (KCA-121B) to this component.
-
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
• Be sure to turn the power off to the unit before changing the
switch position.
.
Ai-NET Cable (Included with CD Changer)
/
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
:
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
• This lead should be used only for controlling the vehicle’s
power antenna. Do not use this lead to turn on an amplifier or
a signal processor, etc.
;
Audio Interrupt In Lead (Pink/Black)
<
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVA-W200E.
=
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
>
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
?
Fuse Holder (10A)
@
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
[
Right Front (+) Speaker Output Lead (Grey)
\
Right Front (–) Speaker Output Lead (Grey/Black)
]
Right Rear (–) Speaker Output Lead (Violet/Black)
^
Right Rear (+) Speaker Output Lead (Violet)
_
Left Rear (+) Speaker Output Lead (Green)
{
Left Rear (–) Speaker Output Lead (Green/Black)
|
Left Front (–) Speaker Output Lead (White/Black)
}
Left Front (+) Speaker Output Lead (White)
V
FULL SPEED™ Connection Cable (KCE-422i) (sold
separately)
0
Remote IN/OUT Connector
