Alpine IVA-D100, Руководство по обслуживанию

Страница: 93 / 119

IVA-D100/IVA-D100E
Description of IC Terminal
D70F3266YGJ :
IC5000
No. Symbol I/O Terminal Description
1 AVREF0 - Reference voltage input terminal for A/D converter.
2 AVSS - GND terminal for A/D,D/A converter.
3 POWER ON CONT O POWER ON power supply control output terminal.
4 ACC ON CONT O ACC ON power supply control output terminal.
5 AVREF1 - Reference voltage input terminal for D/A converter.
6 DC-DC CONT O DC-DC converter power supply control terminal.
7 O.REM CONT O O.REM circuit control output terminal.
8 FLMD0 -
at Flash (FLMD0) : Power supply terminal for Flash programming.
at Mask (IC) : GND connect terminal.
9 VDD - Power supply terminal.
10 REGC - Capacitor connect terminal for internal regulator output stability.
11 VSS - GND terminal.
12 X1(Main CLK)
13 X2(Main CLK)
14 /RESET I System Reset signal input terminal.
15 XT1(GND) - GND terminal.
16 XT2(NC)
17 NC(SCK)
18 BATT-DET I BATT voltage watch/detection signal input terminal.
19 ACC-DET I ACC power supply voltage detection signal input terminal.
20 /DRST I On-chip debug mode Reset signal input terminal.
21 /AI-INT I AI-NET Interruption request signal input terminal.
22 EEP REG AVS-SDA O DATA output terminal to EEPROM, Regulator, AV Selector.
23 EEP REG AVS-SCL O SCLK output terminal to EEPROM, Regulator, AV Selector.
24 NC - No connect terminal.
25 AI-SOUT O
AI-NET Pulse signal output terminal for serial communication.
at Flash programming : Serial data input terminal.
26 AI-SIN I
AI-NET Pulse signal input terminal for serial communication.
at Flash programming : Serial data output terminal.
27 AI-SCLK O AI-NET Pulse signal output terminal for serial communication.
28 AI-R/W O AI-NET Read/Write selection signal output terminal.
29 AI-RS O AI-NET Register selection signal output terminal.
30 /AI-RESET O AI-NET Reset signal output terminal of BUS IC.
31 POWER IC CONT(NC) - No connect terminal.
32 IF-MUTE O IF MUTE signal output terminal.
33 EVSS - GND terminal.
34 EVDD - Power supply terminal.
35 RDS TX(NC)
36 RDS RX(NC)
37 REM-IN I Remote control signal input terminal.
38 REM-OUT O Remote control signal output terminal.
39 DDI I On-chip debug Data input terminal.
40 DDO O On-chip debug Data output terminal.
41 DCK I On-chip debug Clock input terminal.
42 DMS I On-chip debug Mode select signal input terminal.
43 EVOL-SDA O DATA output terminal to E-VOL.
44 EVOL-SCL O SCLK output terminal to E-VOL.
- No connect terminal.
- Main clock connect terminal.
- No connect terminal.
TO SCHEMATIC TO CONTENTS
- 93 -