4
-EN
01GB04iLX-F309-US_EN.fm
ALPINE iLX-F309 68-34732Z91-A (EN)
Depending on the vehicle, it may be necessary to adjust the front-
back position of the Display unit when mounting it.
If front-back position adjustment is necessary, set the slider to the
back position before mounting the display unit to the vehicle.
[Default setting: forward position]
1
Remove 4 flush head screws from the Top and Bottom of
the main unit.
2
Push the slider to the back position (To return the slider
to the forward position, pull it forward).
3
Tightly fix the slider using the 4 screws that were
removed in Step 1.
1
Clean the mounting location.
2
Put on the GPS Antenna mounting plate.
3
Mount the GPS Antenna.
• Do not mount the GPS Antenna inside the center console.
- Mount the GPS Antenna on a flat plane of the dash board or rear
tray.
- Make sure the GPS Antenna is not covered (obstructed) by any
metallic surface or object.
• If the GPS Antenna is mounted near the unit, the reception becomes
poor, and the location of your vehicle may not be displayed correctly.
- Mount the GPS Antenna far away enough from the unit.
- Bundle the GPS Antenna cable away from the rear of the unit.
• Some thermal reflection type or thermal absorption type glass may
interrupt high frequency waves. If reception is poor with the antenna
installed inside the car, try to mount the antenna outside the car.
For safe use, make sure of the following:
•
Location is stable and firm.
•
Does not interfere with safety equipment.
•
Driver’s view and operations are not obstructed.
•
Microphone is located where the driver’s voice can be easily
picked up (for example, on the sun visor).
When you speak into the microphone, you should not have to change
your driving posture. This may cause a distraction, taking your
attention away from safely driving your vehicle. Carefully consider
direction and distance while mounting the microphone. Confirm that
the driver’s voice can be easily picked up at the selected location.
Adjust the front-back position of the Display
unit (Optional)
WARNING
MAGNETIC SCREWDRIVER REQUIRED TO
CAREFULLY REMOVE SCREWS.
Flush head screw
Flush head screw
Main unit
Slider
Mounting the GPS Antenna inside the vehicle
Mounting the Microphone
Flush head screw
Flush head screw
Antenna mounting plate
GPS Antenna
This unit
ML.book Page 4 Friday, January 19, 2018 9:46 AM
