43
-EN
[System]
is selected on the Setup main screen in step 3. See “Setup
System Setup Menu screen
<Setting items>
*1
When Camera Select is set to “Off,” you cannot select this item.
*2
Set this setting after closing the Alpine TuneIt App.
1
Select the desired item.
2
To switch the setting, touch
[ ]
,
[ ]
,
[
]
,
[
]
, or mark the
checkboxes “Off” (
) or “On” (
).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
3
Touch
[
]
to return to the main source screen.
• To return to the previous List screen, touch
[ ]
or
[ ]
in the
previous page. For details, see “About Basic Operation for List
Screen” (page 16).
Camera Setup
[Camera]
is selected on the System Setup Menu screen in step 1. See
“System Setup” (page 43).
You can set up items related to the Camera.
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Rear
When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
You can adjust the camera guide position.
Setting item:
Guide Adjustment
1
Touch
[Guide Adjustment]
.
The camera guide adjustment screen is displayed.
• To adjust the guide position of the Rear Camera, touch
[Hitch
Guide On]
or
[Hitch Guide Off]
to display/hide the Hitch Guide.
You can adjust the Hitch Guide to mark the position of the
junction between your vehicle and your trailer.
2
Touch
[Adjust]
.
• If
[Adjust]
does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching
[
]
[
]
.
System Setup
Camera
Camera Select
Camera Signal*
1
Guide Adjustment*
1
Camera Interrupt (Power Mode)*
1
Factory System Setup
USB/iPod / SiriusXM
Default Vehicle Screen
Maestro Module
External Accessories
External Audio Processor
External Accessory Ctrl
Smartphone Apps
Alpine TuneIt App*
2
The following steps 1 to 3 are common to each “Setting
item” of System Setup. See each section for details.
Setting the Camera Input
Off:
No camera is connected
Rear:
Rear camera is connected
Setting the Camera Signal Input
Adjusting the Rear Camera Guide