6
-
EN
Control and Connection Descriptions
1
2
3
4
5
6
1
Crossover Mode Selector Switch (Front HPF)
Set to HP to turn on the HPF crossover. The Front output becomes mid-
range to highs only.
To use the Front output for full-range, set to OFF.
2
Crossover Frequency Adjustment Control (Front HPF)
Use with the crossover mode selector switch (Front HPF) set to HP.
Use this control to adjust the crossover frequency between 30 and 400 Hz.
It is normally set to 50Hz, but you can adjust it to a level you like.
3
Crossover Mode Selector Switch (Rear HPF)
Set to HP to turn on the HPF crossover. The Rear output becomes mid-
range to highs only.
To use the Rear output for full-range, set to OFF.
4
Crossover Frequency Adjustment Control (Rear HPF)
Use with the crossover mode selector switch (Rear HPF) set to HP.
Use this control to adjust the crossover frequency between 30 and 400 Hz.
It is normally set to 50Hz, but you can adjust it to a level you like.
5
Phase Selector Switch (Subwoofer)
The subwoofer phase can be changed. While sitting in the driving seat,
you can switch between 0˚ (normal phase) and 180˚ (reverse phase) and
choose whichever setting has the lower frequency range output. 180˚
(reverse phase) may be better depending on the speaker installation
position and the shape of the car.
6
Crossover Frequency Adjustment Control (Subwoofer LPF)
Use this control to adjust the crossover frequency between 30 and 400 Hz.
It is normally set to 100Hz, but you can adjust it to a level you like.