Installing the product
19
2.3 Installing the external GPS receiver
To activate the ADAS feature or record driving information (the speed and location), follow the instructions
and install the external GPS receiver on the upper part of the front windshield. Install the external GPS
receiver near the product, taking its cable length into account.
1
Remove the film from the back of the external GPS
receiver.
2
Attach the external GPS receiver's adhesive surface
to the upper part of the front windshield and press
the adhesive part firmly to secure it.
Before installation, make sure the external GPS
receiver's cable length is sufficient and check
the cable routing path.
3
Connect the external GPS receiver to the product’s
GPS connector.
Check the GPS connector location again before
connecting the GPS receiver. If you connect
the external GPS receiver to the DC-IN power
connector, the pins inside the port may be
damaged.
4
Turn on the ACC or starts the engine to check that the product is powered on. After the product is
powered on, the Status LED and the voice guide are turned on.
The product is powered on when electric accessories are turned on or the engine starts.
