Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging. Some splashing may occur.
Components:
Bird Nest Topper
Small Bird Decoration
Tree Stump with Pots
Spout Connector
Transformer wit Plug
Back Cover
Assembling:
Remove product from the box, put base of fountain onto a flat surface.
Wipe with a damp cloth to remove any residual dust or poly-foam.
Fix the Bird Next Topper to the Tree Stump with Pots and screw together
tightly.
(Diagram A)
Fix the Small Bird Decoration to the branch of the Tree Stump with Pots
and screw together tightly.
(Diagram B)
Connect the transparent plastic tube inside the Tree Stump with Pots to
the Pump: then attach plug of LED lamp to the pump, and screw together
tightly.
(Diagram C)
Place pump in the tank and gently press down, make sure the suction
cups grip firmly.
Fill the tank with clean distilled water, till the water level is about 3cm
below the rim (enough to completely submerse the pump), and slide the
Back Cover back on to the back of the fountain.
(Diagram D)
Connect Transformer with the power cable, and screw together tightly
(Diagram E)
Connect Transformer with proper power supply.
Troubleshooting & Caution
If you have any questions and/or problems, please contact the retail store you
purchased this fountain from.
If your pump fails to run
Check the circuit breaker or try a different outlet to make sure the pump is
receiving electrical power.
Check the pump discharge and tubing for any kinks and/or obstructions
Any buildup obstructing the water flow can be flushed with a garden hose
Check the rotor by removing the front cover & plate to access the impellor area.
Turn the rotor and make sure that the rotor is not jammed or broken
If your pump “spews”
Check the water level to make sure the pump is completely submerged and
there if enough water in the basin to operate your fountain. Not having enough
water will cause your pump to spew
If your pump is making abnormal loud noises
Disconnect the pump from the electrical power supply and remove the front
cover & plate
Carefully grip the impeller and gently pull the impeller/rotor assembly out of the
pump housing
Rinse the impeller/rotor assembly and clean the cavity with clean water. If
breakage or damage is found, contact your local retailer for part
Fountain Care
We recommen
d to use Alpine’s all natural cleansing formula to eliminate foam,
lime scale and calcium buildup, fight mineral deposits, leave water crystal clear,
help prevent staining, remove organic contaminants and treat discolored water.
This formula will help prevent pump damage due to hard water build up.
i. For small sized fountains holding water up to 7liters of water, we
recommend Alpine Item # PPL100
ii. For larger sized fountains holding water over 7liters of water, we
recommend Alpine Item # PPL102
iii.
For more information please visit
Caution
o
Always unplug the pump from the electrical outlet before
cleaning & handling
o
Uses with clean water only, do not place the fountain and/or
parts in any other liquid
o
Periodically change water & clean the pump to keep free
from micro-organisms
o
Disconnect and store the unit in a dry place if not in use for
an extended period of time
o
Do not operate with water above 90
°F or 30°C
o
Do not lift, carry or pull the pump by the power cord
o
Do not exceed the maximum voltage & wattage on
transformer
o
NEVER LET THE PUMP RUN DRY