Alpine CVA-1014R, Руководство пользователя

Страница: 21 / 67

20
-EN
Setting for Automatic Change from
DAB to RDS
When the DAB reception is poor, you can set this
selection ON to automatically change to the RDS
station (a station that can be received) within the
same broadcasting station until good reception is
achieved. You can switch this for voice only
(except Service label/Dynamic label display). The
display and operation remain as for DAB.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds.
2
Press preset 4 to select RADIO setting mode.
Press preset 4 again to select RDS/DAB SW.
3
Press g or f to select RDS/DAB ON or
OFF.
For any other settings, press preset 4 or another
preset button.
4
Press MUTE/SETUP to return to normal mode.
NOTE
When reception is being changed from DAB to RDS, the
DAB indicator blinks.
Setting ON/OFF for DRC (Dynamic
Range Control)
If you set this ON when receiving the sound of a
wide Dynamic Range, the DRC (Dynamic Range
Control) gain increases when the source sound is
small, and the DRC (Dynamic Range Control)
gain decreases when the source sound is large,
making the Dynamic Range narrower to give you
better and more comfortable sound even in the
vehicle that produces a large noise.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds.
2
Press preset 4 to select RADIO setting mode.
Press preset 4 again to select DRC.
3
Press
g
or
f
to select DRC ON or OFF.
For any other settings, press preset 4 or another
preset button.
4
Press MUTE/SETUP to return to normal mode.
NOTE
When a radio programme is set to ON, sound other than
what you previously set may be produced depending on
the broadcast. In this case, turn the programme OFF.
DAB Operation (Optional)
g g g g g f f f f f
MUTE/
SETUP
Preset 4