Alpine CDM-7861 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Alpine CDM-7861 Скачать руководство пользователя страница 7

5

-EN

Display Angle Adjustment

Movable display

The movable display may be adjusted to 3
different angles depending upon user preference.

1

Press the ANGLE

8

or

9

button to adjust the

angle of the movable display.

NOTES

•

The display will close a half minute after the ignition
key is turned to the OFF position.

•

The adjusted angle of the display is stored in memory.
There is no need to re-adjust the angle when the power
is turned back on.

CAUTION

Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.

Subwoofer On and Off

1

Press the INTLZ button for at least 3 seconds.

2

Press the Preset 1 button.
With each press, subwoofer is toggled On or Off.

NOTES

•

Initial mode is "Subwoofer OFF."

•

Set to "Subwoofer OFF" unless the subwoofer is used.

•

When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Bass/Treble/Balance/Fader.

Adjusting Volume/Bass/Treble/
Balance (Between Left and Right)/
Fader (Between Front and Rear)

1

Press the MODE (Audio Control) knob
repeatedly to choose the desired mode.
Each press changes the modes as follows:

NOTES

•

If the MODE (Audio Control) knob is not rotated in 5
seconds after selecting the BASS, TREBLE,
BALANCE, or FADER mode, the unit automatically
sets in the VOLUME mode.

•

When the subwoofer, BBE mode is set to ON, the level
of the subwoofer, BBE can be adjusted.

2

Rotate the MODE (Audio Control) knob until the
desired sound is obtained in each mode.

NOTE

The settings of the Bass and Treble will be individually
memorized for each source (FM, AM and CD) until the
setting is changed. Depending on the connected devices,
some functions and display indications do not work.

Turning Loudness On/Off

Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity to
bass and treble sound.

1

Press and hold the MODE (Audio Control) knob
for at least 2 seconds to activate or deactivate
the loudness mode.
The display shows "LOUD ON" when the
loudness mode is activated.

→

VOL

→

BAS

→

TRE

FAD

←

BAL

←

«
...
5
6
7
8
9
...
»

Содержание CDM-7861





















Отзывы:

Нет отзывов