3
If this unit is successfully connected to a BLUETOOTH
compatible device, “CONNECTED” is displayed, and then the
unit returns to normal mode.
Depending on the mobile phone, it may be necessary to input
a passcode. In this case, “CODE 0000” is displayed. Input the
passcode “0000” in the BLUETOOTH compatible device to make the
pairing. After the pairing is completed, the unit will automatically
connect to the BLUETOOTH compatible device. If you input the
wrong passcode or the communication fails, “FAILED” is displayed.
You can flexibly customize the sound of call to fit your own preferences.
You can set whether to update the phone book automatically.
The phone book is listed alphabetically according to the initial letter of
name. You can choose to arrange the phone book list order according to
the initial letters of the FIRST NAME or LAST NAME.
Setting the BLUETOOTH sound quality
Phone Book Auto Update ON/OFF
Changing the Phone book List Order
Setting item:
CALL SOUND
Setting item:
PB UPDATE
Setting item:
PB ORDER
Setting item:
SENDER ID
e
e
e
e
e
e
Further setting items:
VOL LV ADJ / AUTO SET
Further setting items:
MSG ALERT / CALLER ID
You can emphasise or weaken the volume level of the Phone call, the ring
tone and the microphone input to fit your own preferences.
When it is set to ON, the indicator blinks for 30 seconds while
receiving a text message. The indicator remains on if there is an
unread text message on the connected mobile phone.
If you want to keep the ID information of the caller from others, set this
item to OFF. While you are dialing a number, telephone name will be
displayed as “ID UNSENT”. While a call is dialing in or during a call, “NO
NAME” will be displayed.
This unit provides 5 methods to improve the sound quality of calling.
You can choose the type according to your own preference.
Setting contents:
PHONE TALK:
-5 ~ +5 dB
RING TONE:
-5 ~ +5 dB
MIC GAIN:
-5 ~ +5 dB
Setting contents:
OFF / ON (Initial setting)
Adjusting the volume (VOL LV ADJ)
Setting text message indicator ON/OFF
(MSG ALERT)
Setting the caller information display ON/OFF
(CALLER ID)
Sound Auto setting (AUTO SET)
Note
Note
Note
Note
•
•
•
•
•
•
•
These setting items are the same as PHONE TALK, RING TONE and
MIC GAIN settings in AUDIO step mode, refer to “Setting the Source
Volume Level” on page 13.
Depending on the mobile phone, this function may not be performed.
“WAITING” will be displayed while the Phone book order is switching.
You can quit the “WAITING” screen to perform other operations by
pressing
c
when the ordering is still in progress, at this time, the phone
book is not accessible. In addition, the ordering may affect the playback of
BT AUDIO.
The text of the message will not be displayed on this unit.
When this unit prompts you of a received text message, it is recommended
to read the message after stopping your car in a safe place, rather than
read it immediately through your phone.
The functions below are designed to improve the sound quality of the
caller to driver.
Noise reduction: This function can reduce the road noise, but
excessive enhancement may affect the sound quality of calling.
Echo-cancel: This function can reduce the echo noise, but excessive
enhancement may affect the sound quality of calling..
Improvement effect differs depending on the actual calling
environment, so please choose a suitable type accordingly.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1:
Standard Mode (recommended)
TYPE2:
Enhance the noise reduction
TYPE3:
Enhance the echo-cancel
TYPE4:
Enhance both noise reduction and echo-cancel
TYPE5:
Weaken both noise reduction and echo-cancel
Setting contents:
OFF / ON (Initial setting)
OFF:
The phone book will not update.
ON:
When the mobile phone reconnects with this unit, the phone book
will update.
Setting contents:
FIRST NAME (Initial setting) / LAST NAME
You can choose whether to use these functions according to the following
setting.
Setting the caller information display/text
message indicator ON/OFF
20
-EN
Содержание CDE-W233E
Страница 2: ......
