Alpine CDE-9882RSi, Руководство пользователя

Страница: 13 / 33

11
-EN
When traffic information stations cannot be received:
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The “EON” indicator lights up while an RDS EON
station is being received. If the station being received does not
broadcast the traffic information, the receiver automatically tunes in
the related station that broadcasts the traffic information when it
occurs.
3
Press and hold BAND/TA for at least 2 seconds to
deactivate the Traffic Information mode.
The “TA” indicator goes out.
Priority News
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Press F/SETUP to activate the function mode while
the unit is in Radio (FM receiving) mode.
2
Press NEWS 2 to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display.
To disable the PRIORITY NEWS function, press
NEWS 2 .
• In the PRIORITY NEWS function, unlike in the TA function, the
volume does not increase automatically.
3
Press F/SETUP to activate the normal mode, while
the unit is in Radio (FM receiving) mode.
• Operate the unit while the indicator lights up. If no operation
is performed for 10 seconds, the indicator goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
Press VIEW while receiving FM in the radio mode to
select the Radio Text display.
The display will change every time the button is pressed.
If there is PS (Programme Service Name):
PS (Programme Service Name) * RADIO TEXT
PS (Programme Service Name)
* Press and hold VIEW for at least 2 seconds if PS is displayed in the
radio mode, frequency will be displayed for 5 seconds.
If there is no PS (Programme Service Name):
FREQUENCY RADIO TEXT FREQUENCY
The display shows “WAITING” for a few seconds, then starts
scrolling the text message.
• If there is no receivable text message or the unit cannot receive a text
message properly, the display shows “NO TEXT”.
Playback
1
Press (OPEN) .
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually, and the “DISC IN” indicator
lights up.
When a disc is already inserted, press
SOURCE/ to
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO iPod *
1
/AUX+ *
2
BT AUDIO *
3
TUNER
*
1
Displayed only when the iPod is connected and AUX + SETUP is set
to OFF, refer to “Setting the AUX+ SETUP Mode” (page 20).
*
2
Displayed only when the AUX + SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 20).
*
3
Only when BLUETOOTH IN is set to ADAPTE, refer to “Setting the
BLUETOOTH Connection” (page 18).
3
While playing back MP3/WMA/AAC, press or to
select the desired folder.
Pressing and holding or will change folders
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press / .
Pressing / again will resume playback.
CD/MP3/WMA/AAC
/ENT
4 5
(OPEN)
VIEW
/
Rotary encoder
/ESC
SOURCE/