19
-EN
HI TEMP
ERROR
Indication for CD
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Mechanism error.
1. Press the
c
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2. When the error indication remains after ejecting,
press the
c
button again.
If the error indication still does not turn off after
pressing the
c
button for a few times, consult your
Alpine dealer.
Note
When the "ERROR" is displayed:
In case that the disc cannot be ejected by pressing the
c
button, press the Reset switch (refer to page 4) and press the
c
button again.
If not ejecting, consult your Alpine dealer.
• No CD is inserted.
- Insert a CD.
Indication for CD Changer
(CDM-9825RB/CDM-9823RR/CDM-9823R
only)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
NO DISC
HI TEMP
ERROR - 01
NO MAGZN
NO DISC
Specifications
FM TUNER SECTION
Tuning Range
87.5 – 108.0 MHz
Mono Usable Sensitivity
0.7 µV
Alternate Channel Selectivity
80 dB
Signal-to-Noise Ratio
65 dB
Stereo Separation
35 dB
Capture Ratio
2.0 dB
MW TUNER SECTION
Tuning Range
531 – 1,602 kHz
Sensitivity (IEC Standard)
25.1 µV/28 dB
LW TUNER SECTION
Tuning Range
153 – 281 kHz
Sensitivity (IEC Standard)
31.6 µV/30 dB
CD SECTION
Frequency Response
5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)
Below measurable limits
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
105 dB
Channel Separation
85 dB (at 1 kHz)
PICKUP
Wave Length
795 nm
Laser power
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
Maximum Power Output
50 W
× 4
(CDM-9825RB/CDM-
9823RR/CDM-9823R)
45 W
×
4
(CDE-9822RB/CDE-
9821RM/CDE-9821R)
Output Voltage
2 V/10k ohms
Bass
±14 dB at 60 Hz
Treble
±14 dB at 10 kHz
Weight
1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width
178 mm (7")
Height
50 mm (2")
Depth
160 mm (6-5/16")
NOSEPIECE SIZE
Width
170 mm (6–3/4")
Height
46 mm (1-13/16")
Depth
20 mm (25/32")
Due to continuous product improvement, specifications and
design are subject to change without notice.
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
