Alpine CDE-7860R, Руководство пользователя

Страница: 16 / 28

14
-EN
Scanning Programmes
1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button to
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected (CDM-
7874R/CDM-7872R/CDM-7871R only):
Press the F button so that the "FUNC" indicator lights
up, then go to step 1.
Press the F button to return to the normal mode.
The "FUNC" indicator light goes out.
Controlling CD Changer (Optional)
(CDM-7874R/CDM-7872R/CDM-
7871R only)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7874R/CDM-7872R/CDM-7871R, you
can control the CD Changer using the CDM-
7874R/CDM-7872R/CDM-7871R.
NOTE
The CD controls on the CDM-7874R/CDM-7872R/
CDM-7871R for the CD Changer operation are
functional only when the CD Changer is interconnected
with the CDM-7874R/CDM-7872R/CDM-7871R.
1
Press the SOURCE button to activate the CD
Changer.
The display shows "changer", the disc number
and track number.
NOTE
To start play or pause play, press the
:
/
J
button.
2
Make sure that the "FUNC" indicator light goes
out, then press the
Preset buttons to select the
desired disc loaded in the CD Changer.
NOTES
•
After selecting the desired disc, you can operate in
the same way as for the CD player.
For details, please see the CD Operation section.
•
If the "FUNC" indicator is illuminated the Disc
Select buttons become nonfunctional.
CD Player Operation
-
/
J
SOURCE
Preset
SCAN