9
-EN
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Listening to Radio
1
Press
SOURCE
to select TUNER mode.
2
Press
BAND
repeatedly until the desired radio band is
displayed.
F1 (FM1)
F2 (FM2)
F3 (FM3)
MW
LW
F1 (FM1)
3
Press
TUNE
A.ME
to select the tuning mode.
SEEK DX (Distance mode)
SEEK LOCAL (Local mode)
MANUAL (Manual mode)
SEEK DX
Distance mode (Initial setting):
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning). The “
” indicator lights up.
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
In Manual mode, holding down
or
will change the
frequency continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2
Press and hold for at least 2 seconds, any one of the
preset
buttons (1 through 6)
into which you wish to store the
station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 30 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
Remote control sensor
Radio
SOURCE/
/ENTER
BAND
TUNE/A.ME
Rotary encoder
Preset buttons
(1 through 6)
Содержание CDE-190R
Страница 2: ......
