13
-EN
Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Loudness/Defeat
1
Press
AUDIO
SETUP
repeatedly to choose the desired
mode.
Each press changes the mode as follows:
SUBWOOFER
*1/*3
BASS LEVEL
*2/*3
MID LEVEL
*2/*3
TRE LEVEL
*2/*3
BALANCE
FADER
LOUDNESS
*2/*3
DEFEAT
VOLUME
SUBWOOFER
*1
When the SUBWOOFER mode is set to OFF, its level cannot be
adjusted.
*2
Adjustable only when DEFEAT is OFF.
*3
Not displayed when BASS ENGINE SQ mode is on. (Page 14)
Note
• If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
2
Turn the
Rotary encoder
until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS,
MID, TRE LEVEL and LOUDNESS will return to the factory
defaults.
Audio Setup
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold
AUDIO
SETUP
for at least 2 seconds to
activate the SETUP mode.
2
Turn the
Rotary encoder
to select AUDIO, and then press
ENTER
.
Note
• When BASS ENGINE SQ setting is set to OFF (MANUAL SET)
(page 14), you can also activate the Audio Setup mode directly by
pressing
BASS
.
3
Turn the
Rotary encoder
to select the desired sound
setting menu, and then press
ENTER
.
EQ PRESETS
*1/*3/*4
BASS ENGIN
*2
LOUDNESS
*1/*3
3BAND EQ
*1/*3/*4/*5
SOURCE VOL
SUBWOOFER
SUBW LPF
*1/*3/*6
SUBW PHASE
*6/*7
SUBW SYS
*3/*6
POWER IC
(e.g. Select SUBWOOFER)
*1
Adjustment cannot be performed when DEFEAT is set to ON.
*2
Not displayed when the Audio Setup mode is activated by
pressing
BASS
in MANUAL SET mode (page 16).
*3
These items are set uniformly in BASS ENGINE SQ mode by
adjusting BASS ENGINE SQ Level (page 16) and cannot be
adjusted separately. If you want to change these settings
separately, a message is displayed asking you to confirm that you
want to exit the BASS ENGINE SQ mode. Select “YES” to make
the setting.
*4
Any changes made to either EQ PRESETS or 3BAND EQ are
reflected in the other’s settings.
*5
In step 3, three sound adjustment items (Bass, Mid and Treble)
can be selected in 3BAND EQ mode. Turn the
Rotary encoder
to select the desired item, and then press
ENTER
to continue
to step 4.
*6
These functions are inoperable when SUBWOOFER is set to
OFF.
*7
This function is inoperable when SUBW LPF is set to OFF
(page 15).
4
Turn the
Rotary encoder
to change the setting, and then
press
ENTER
.
(e.g. Select SUBW ON or SUBW OFF)
5
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
• Pressing
r
returns to the previous Sound menu mode.
• Pressing and holding
r
for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, Sound menu mode is
canceled.
Sound Setting
Subwoofer
+0 ~ +15
Bass level
−7 ~ +7
Mid level
−7 ~ +7
Treble level
−7 ~ +7
Balance
L15 ~ R15
Fader
R15 ~ F15
Loudness
ON/OFF
Defeat
ON/OFF
Volume
0 ~ 35
/ENTER
AUDIO/SETUP
BASS
Rotary encoder
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
