10
-EN
Presetting Stations Manually
1
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6)
into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press
BAND
repeatedly until the desired radio band is
displayed.
2
Press and hold
TUNE/A.ME
for at least 2 seconds.
The tuner will automatically seek and store 6 strong stations in
the selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Notes
• If no stations are stored, the tuner returns to the station you were
listening to before the auto memory procedure began.
• Sub-program service of Multicast stations are not included in the
automatic memory search.
Tuning to Preset Stations
1
Press
BAND
repeatedly until the desired band is
displayed.
2
Press any one of the station
preset buttons (1 through 6)
that has your desired radio station in memory.
The display shows the band, preset number and frequency of
the station selected.
Note
• If the digital signal for any service becomes weak, none of the digital
features are available. For example, a Multicast channel recalled from
preset memory will revert to the Main Program Service with loss of the
digital signal (“SIG LOSS” is displayed). Upon return of the digital
signal strength, the tuner will resume playback of the Multicast channel.
Frequency Search Function
You can search for a radio station by its frequency.
1
Press
ENTER
in Radio mode to activate the search
mode.
2
Turn the
Rotary encoder
to select “F SEARCH”, and then
press
ENTER
to enter the frequency search mode. *
*
Operation is not required when LISTENMODE is set to ANALOG
(refer to “Switching the listening mode” on page 22).
3
Turn the
Rotary encoder
to select the desired frequency.
4
Press
ENTER
to receive the selected frequency.
Note
• Press and hold
for at least 2 seconds in the search mode to cancel.
Or, the search mode will be canceled if no operation is performed for 60
seconds.
Multicast Station Search (HD Radio mode
only)
If a frequency has a Multicast station broadcast, the Multicast indicator
lights up. Use the Multicast search mode to select a desired program
from the Multicast stations available.
Note
• Make sure LISTENMODE is set to other than ANALOG (refer to
“Switching the listening mode” on page 22).
1
Choose a frequency with the Multicast indicator
on.
2
Press
ENTER
to activate the search mode.
3
Turn the
Rotary encoder
to select MULTI CAST, and then
press
ENTER
to enter the Multicast search mode.
4
Turn the
Rotary encoder
to select the desired station, and
then press
ENTER
. The selected station is received.
Notes
• Press
VIEW
k
at step 4. You can change the display between station
name and program type.
• Press and hold
for at least 2 seconds in the search mode to cancel.
Or, the search mode will be canceled if no operation is performed for 60
seconds.
