Alpine CDE-111R, Руководство пользователя

Страница: 26 / 37

24
-EN
2
Connection the USB Memory directly to the USB
Connection Terminal, or via the USB cable.
1
Carefully, pull out the USB Memory from the USB cable or
the USB Connection Terminal.
2
Close the cover of the USB Connection Terminal.
Notes
• Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
• When removing USB Memory, pull it out straight.
• If sound is not output or USB Memory is not recognized even when
USB Memory is connected, remove USB Memory once, and then
connection it again.
• Route the USB cable away from another cables, etc.
• After removing the USB Memory, close the cover of the USB Connection
Terminal to prevent dust or foreign objects from entering and causing a
malfunction.
About MP3/WMA/AAC File of USB Memory
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB Memory. This
unit can recognise at least 100 folders and 100 files per folder stored in
USB Memory. Playback may not be performed if a USB Memory exceeds
the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back USB Memory.
Corresponding File Systems
This device supports FAT 12/16/32 for USB Memory device.
*
The illustrator is for CDE-114BTi.
Connecting an iPhone/iPod
An iPhone/iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold separately
for CDE-111R/CDE-111RM/CDE-113BT). When this unit is connected
by using the cable, the controls on the iPod are not functional.
Notes
• Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer to
“Setting the AUX+ SETUP Mode” on page 19).
• If the BLUETOOTH INTERFACE (KCE-400BT) and an iPhone/iPod
are connected at the same time, be sure to disconnect the iPhone/iPod
from BLUETOOTH INTERFACE (KCE-400BT) while turning ACC to
OFF. (CDE-111R/CDE-111RM/CDE-112Ri only).
• If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, use the unit (CDE-113BT/
CDE-114BTi only) in which the BLUETOOTH function is built, or use
the BLUETOOTH INTERFACE (KCE-400BT) (sold separately)
(CDE-111R/CDE-111RM/CDE-112Ri only).
• Internet and telephone functions of iPod touch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs, at this time do not operate the unit
to avoid a malfunction.
• Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
iPhone/iPod models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (2nd generation): Ver.2.2
iPod nano (4th generation): Ver.1.0.3
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.2.2
iPod nano (3rd generation): Ver.2.0
iPod classic (80 GB, 160 GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1
• Confirmed devices regarding Works with iPhone. Correct function of
earlier versions cannot be guaranteed.
iPhone 3G: Ver.2.2
iPhone: Ver.2.2
• For clarity in identifying your model of iPod, please see Apple’s own
document “Identifying iPod models” at http://support.apple.com/kb/
HT1353
• This unit does not support video playback from iPhone/iPod, even
using a video-compatible cable.
Remove USB Memory
USB Connection Terminal
This unit
USB Memory
(sold separately)
or
USB Memory
(sold separately) Cable (sold
separately)
iPhone/iPod (optional)
SOURCE/ 
 /SOUND
 /ESC
 4
5

6

2
1  /AF
 /ENT
  VIEW
Rotary encoder
Preset buttons
(1 through 6)
Downloaded from Caradio-Manual.com Manuals