9
-EN
01GB05CDA9885L.fm
ALPINE CDA-9885L 68-08564Z17-A (EN)
5
To pause playback, press
/
/
ENT
.
Pressing /
/
ENT
again will resume playback.
6
After pressing
(OPEN)
to open the front panel,
press
to eject the disc.
•
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
•
If the CD does not eject, press and hold
for at least 2 seconds.
•
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
•
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
•
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
*
Displayed when “Turning the Clock Display ON/OFF” (page 16) is
set to ON.
•
Press
TITLE
to switch the display. See “Displaying the Text”
(page 14) for information about display switching.
Repeat Play
Press
4
to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press
4
again and select off to deactivate repeat play.
CD mode :
*
1
When a CD changer is connected.
•
If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
MP3/WMA/AAC mode :
*
2
When an MP3 compatible CD changer is connected.
•
If a CD changer or an MP3 compatible CD changer is connected:
After pressing
FUNC./SETUP
to select the function mode
(RPT/M.I.X.), perform the operation within 10 seconds.
M.I.X. (Random Play)
Press
5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press
5
again.
Internal CD mode :
CD Changer mode :
*
3
When a CD changer equipped with the ALL M.I.X. function is
connected.
•
If M.I.X. is set to ON during RPT
(REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
19
20
VOL.12
AM 12:02
2:13
Clock display
*
Volume level
Folder number
display
Elapsed time
File number
display
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played
back.
: A disc is repeatedly played back.
: The tracks are played back in random
sequence.
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be included in the random
playback sequence.
68-08564Z17-A_F.book Page 9 Tuesday, December 26, 2006 4:22 PM
