7
-EN
01GB05CDA9856.fm
ALPINE CDA-9856 68-04123Z46-A (EN)
Initial System Start-Up
Be sure to press the
RESET
switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press
(OPEN) to open the front panel, then
remove it.
3
Press
RESET
with a ballpoint pen or similar pointed
object.
Adjusting Volume
Turn the
Rotary encoder
until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
MUTE
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
MUTE
again will bring the audio back to its
previous level.
Setting Time
1
Press
TITLE
repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 15)
2
Press and hold
TITLE
for at least 2 seconds while
the time is displayed.
The time indication will blink.
3
Turn the
Rotary encoder
to adjust the hours while
the time indication is blinking.
4
When the hour has been adjusted, press
MODE
.
5
Turn the
Rotary encoder
to adjust the minutes
while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing
TITLE
.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold
MODE
for at least 2 seconds after
setting the “hour.” Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
RESET switch
•
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote
control. For details, consult your Alpine dealer.
•
Point the optional remote control transmitter at the remote
control sensor
Remote control sensor
01GB00CDA9856.book Page 7 Thursday, October 20, 2005 4:33 PM
Содержание CDA-9856
Страница 36: ......
