background image

24

-EN

CD Player Operation

Insert a disc with the label side facing up.

2

Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The
movable display will close and playback will begin.
When a disc is already inserted, press the 

SOURCE

button to switch to the CD mode.

The mode will change every time the button is pressed.

3

To pause playback, press the 

-

/

J

 button.

Pressing the 

-

/

J

 button again will resume playback.

4

To eject the disc, press the 

c

 button.

NOTES

Do not insert or remove a CD when loading or ejecting a CD,
as malfunction may result.

If the CD does not eject, press 

c

 button again for more than

3 seconds with the movable display open.

About the usable discs.

We recommend using only compact discs containing the
marks shown below.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-
ReWritable) for audio use on this unit. You can also play
CD-Rs/CD-RWs containing MP3 formatted audio files.

Some of the following CDs may not play on this unit:
Flawed CDs,w with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable conditions,
CDs on which a recording failed and a re-recording
was attempted.

Use discs with MP3 files written in the format
compliant with ISO 9660 level 1 or level 2. For details,
see page 30-31.

Opening and Closing the Movable
display

1

Press the 

c

 button.

The movable display will open.

To close the movable display, press the 

c

 button

again.
The movable display will close.

NOTES

Do not apply shock to the movable display when it is open as
it may result in malfunction of the unit.

The display may be dim during low temperatures and
immediately after turning on the power. The brightness will
return to normal as time elapses.

The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.

Playback

1

Press the 

c

 button.

The movable display will open.

(

 Only when the CD changer is connected)

g

 DN

 

f

 UP

  

       →

 TUNER 

 CD 

 CD CHANGER

REPEAT

-

/

J

c

SOURCE

Содержание CDA-7897





















































Отзывы: