Alpine CDA-7878R, Руководство пользователя

Страница: 14 / 48

12
-EN
BAND
g DN f UP TITLE
MODE/Audio Control - / J
Basic Operation
Titling Discs
It is possible to title your favourite CD's.
1
Press the TITLE button and select the title
display mode.
For details, see “Displaying the Title/Text” (page
11).
2
Press and hold the TITLE button for at least 2
seconds. The first character will blink.
3
Press the BAND button to select the characters/
symbols.
4
Rotate the Audio Control knob to select the
desired letter/numeral/symbol available for
naming. (“A” for example).
5
Press the MODE button to store the first
character. The first character will stop blinking
and the display will automatically advance to the
next character. When that character begins to
blink, you may choose the next letter or symbol
of your title.
6
Repeat the steps 3 to 5 above to complete the
titling. Pressing the
MODE button after entering
the 12th character, automatically stores the title
into memory.
When entering a title of less than 12 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 7 to complete the title.
→
Upper case
→
Lower case
→
Numeral/Symbol
7
Press and hold the TITLE button for at least 2
seconds to record the title.
NOTES
•
You can enter 24 CD titles on this unit. If you try to
store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored.
•
The CD Changer title length or memory capacity
varies depending upon the model being used.
•
To input a new title, one of the previously inputted
titles must first be deleted.
•
When you want to erase a title, enter the “ ” symbol
into all spaces.
•
The operations described in steps 3 to 6 must be made
within 10 seconds. The input mode will be cancelled if
no action is taken for over 10 seconds.
•
Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Erasing Disc Title
1
Press the TITLE button to select the titling mode.
Then, press and hold the button for at least 2
seconds.
2
Press and hold the
-
/
J
button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3
Press the
g
DN or
f
UP button repeatedly
until the title you want to erase is displayed.
4
Press and hold the
-
/
J
button for at least 2
seconds to erase the title displayed.
5
Press and hold the TITLE button for at least 2
seconds to cancel the title erasing mode.
NOTE
You cannot erase CD-TEXT.