19
-EN
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two
external outputs (AUX).
1
Press the
SOURCE
button on the CDA-7977/
CDA-7876/CDA-7875/CDA-7873 to activate the
CD Changer mode.
Alternatively, press the SOURCE button on the
Remote Control (RUE-4187) to activate the CD
Changer mode. Proceed to step 3 below to
select the desired CD Changer.
2
Press the
BAND
button on the CDA-7977/CDA-
7876/CDA-7875/CDA-7873 or the RUE-4187 to
activate the CD Changer Selection mode.
3
The CD Changer Selection mode remains active
for 3 seconds after step 2 is performed. Press
the
BAND
button until the desired CD Changer
indicator appears on the display.
NOTE
If the selected CD Changer is not connected, the display
will show “NO CHGR .”
Alternatively press the
BAND
button on the
Remote Control until the desired changer
indicator appears on the display.
4
To operate the selected changer, see “CD Player
Operation” section.
NOTE
For further details about the external input (AUX) when
using KCA-410C, see ”Setting the AUX Mode (V-Link)"
on page 8.
BAND
SOURCE
