25
-EN
&
Left Rear (+) Speaker Output Lead (Green)
(CDA-7864/CDA-7863/CDA-7862 only)
(
Left Rear (–) Speaker Output Lead (Green/
Black) (CDA-7864/CDA-7863/CDA-7862 only)
)
Left Front (–) Speaker Output Lead (White/
Black) (CDA-7864/CDA-7863/CDA-7862 only)
~
Left Front (+) Speaker Output Lead (White)
(CDA-7864/CDA-7863/CDA-7862 only)
+
Ai-NET Connector
Connect this to the output or input connector of other
product (CD Changer, Equalizer, etc.) equipped with
Ai-NET.
NOTE
You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) to this
component.
,
DC/DC Converter (CDA-7965 only)
NOTES
•
Do not install the converter at a location subjected to
water such as under the floor mat or air conditioner.
This may cause a malfunction.
•
Do not bundle the DC/DC converter cable with other
audio cables. Doing so may induce noise into your
system.
-
Ai-NET Cable (Included with CD Changer)
.
Front Output RCA Connectors
/
Rear Output RCA Connectors (CDA-7965 only)
RED is right and WHITE is left.
:
Subwoofer RCA Connectors (CDA-7965 only)
RED is right and WHITE is left.
;
Rear/Subwoofer Output RCA Connectors
(CDA-7864/CDA-7863/CDA-7862 only)
RED is right and WHITE is left.
<
RCA Extension Cable (Sold Separately)
=
System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure to turn the power off to the unit before changing
the switch position.
1
Antenna Receptacle
2
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
3
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
4
Audio Interrupt In Lead (Pink/Black)
5
Illumination Lead (Orange)
This lead may be connected to the vehicle's
instrument cluster illumination lead. This will allow
the backlighting of the CDA-7965/CDA-7864/CDA-
7863/CDA-7862 to dim whenever the vehicle's lights
are turned on.
6
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's
fuse box or another unused power source which
provides (+)12V only when the ignition is turned on
or in the accessory position.
7
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle's battery.
NOTE(CDA-7864/CDA-7863 only)
Use an extension battery lead (20A)(sold separately) and
connect it directly to the positive (+) side of the vehicle's
battery.
8
Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
9
Fuse Holder
(5A ...... CDA-7965 only)
(20A .... CDA-7864/CDA-7863 only)
(15A .... CDA-7862 only)
!
Power Supply Connector
"
Right Front (+) Speaker Output Lead (Gray)
(CDA-7864/CDA-7863/CDA-7862 only)
#
Right Front (–) Speaker Output Lead (Gray/
Black) (CDA-7864/CDA-7863/CDA-7862 only)
$
Right Rear (–) Speaker Output Lead (Violet/
Black) (CDA-7864/CDA-7863/CDA-7862 only)
%
Right Rear (+) Speaker Output Lead (Violet)
(CDA-7864/CDA-7863/CDA-7862 only)
To prevent external noise from entering the audio system.
•
Locate the unit and route the leads at least 10 cm away from the car harness.
•
Keep the battery power leads as far away from other leads as possible.
•
Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.
•
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various Alpine noise suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
Содержание CDA-7862
Страница 28: ...26 EN...
